Bullet Points:

1.Plug and Play: Just plug it into your car’s OBD2 connector and you’re ready to go. The plug and drive obd2 is a chip tuner box that plugs into your car’s OBD2 connector to improve your car’s performance. Plug and play device. Easy to install.
2.Based on OBD2 Protocol: Fits all cars since 1996. It works based on OBD2 protocol and remaps the car’s computer ECUOBD2. The eco obd2 fuels saver adjusts the boost pressure, fuels volume, injections timing, and pressure based on the data received by the ECU to improve your car’s performance.
3.Fuels Saving: OBD2 protocols will adjust itself to the car according to the drivers’ habits, and keep remapping the ECU to increase the performance of the engine and save energy.
4.Improve Car Performance: When plugged into the OBD2 connector, the Fuels Saver receives the information from the car computer ECU. With the received data from ECU, it adjusts the boost pressure, the number of fuels, spraying timing, and pressure to increase car performance.
5.NO Negative Effect: No damage to the engine of the car computer ECU, and no negative effects to the car factory setting. To turn back to the car’s original settings, just unplug it from the OBD2 connector.
Working Principle:
Power Upgrade Box is based on OBD2 protocol, which works by remapping and adjusting the car’s trip computer. After 200km of driving, the power upgrade box will automatically adjust to the car’s trip computer according to the car owner’s driving habits to enhance the engine performance. According to the owner’s driving habits, this product can re-adjust the ECU of the trip computer to increase the engine power. It will automatically adjust according to the increase of the car’s mileage to adapt to the change of the owner’s driving habits to achieve the optimal effect of increasing power.

Specifications: Only for vehicles with 16-pin OBD connector.

Color: Black for gasolines vehicles, red for diesel vehicles

Function.

1. 35% power improvement
2. 25% torque improvement
3. Reduce fuels consumption by 15%
4. Improve throttle lag
5. Slow down the stutter of gear shifts
(This is a theoretical value, mainly depends on car condition and driver’s habit)

Installation and calibration:

1, find the car OBD interface, and then insert the device.
2, this one is more critical, twists the car key, turn on the ignition for switch. (Do not start the car)
4, press the device reset button for about 5 seconds, release the button and wait for a moment about 30-54 seconds (the device will establish a connection with the ECU)
5、Start the engine.
6. The device will automatically recognize the owner’s car model and driving habits, and after about 200 km (150 miles) of break-in, the device will automatically adjust the engine power to achieve optimal results.

Package includes:

1 x Fuels Saver